Before going to a doctor, you primarily make sure what the symptoms are. The same case applies with softeners, which require a bit of examining before repairing. You need to do troubleshooting of the best water softener under $500 before doing anything so that the steps are done without any issues.
First of all, you need to check what the symptoms are, some signs might appear like leaking, noise which are easy to take into consideration. But some symptoms are hard to notice, for that reason you need to focus carefully on the softener.
If you have a system installed in your home to soften liquid and if you feel the below-mentioned factors, then there is something pretty much wrong with your softener;
- Your hair is a bit dry, developing scalp, and feels more lifeless.
- Stains or soap scum formed on the showerhead
- Liquid has a specific odor coming out
- The towel becomes scrubby, while clothes become rough
- Bit of leaking from the installation area and a trickling sound.
If these symptoms are around and there are other things alike too, then you need to check the common issues which are also mentioned below;
- The problem is pretty much with the salt bridge
- The motor might have failed
- Filter is very dirty
- System is clogging
- Resin beads have malfunctioned
Troubleshooting and Repair:
Well, the problem with the salt bridge is because of the fact that the softener is not using the salt and because this brine is not made. Saltbridge is actually a really hard crust and thick on the outside that develops in the tank that causes regeneration to function improperly.
If you locate it, then you simply have to turn the supply off from the softener and manually disassemble it. You can remove it by simply using a long handle or something. Simply insert that long handle in the tank of brine and chip it away until it crashes the salt bridge.
Resin beads take up quite a lot of reasoning to sort out the real problem. In the Best Water Softener under $500 review, you come to know that these are actually small structures that look skeletal and are used as means for ion exchange mechanisms, which in return softens your home liquid.
They are responsible for various activities inside the process of the unit and when you talk about Resin Beads, you usually talk about the whole system. Some mechanisms you might find are;
- Metal fouling that aims to reduce the capacity of beads
- Water Hammer that causes beads to crack because of shock from pressure
- Oxidation in which the chlorine amount causes these Resin Beads to break or swell or lose their strength.
- Resin Attrition includes the cracked or broken beads to cause reduced exchange sites.
Failure of Motor:
There might be an issue with the motor and it failed, causing you to face above mentioned problems. Whether you are purchasing a premium product or a Best water softener under $500 just like we mentioned, it can face some serious problems in the motor.
It is always better to check the motor before purchase, see its pressure and compare it with the specifications. The working should be exceptional in the first few days, but if it isn’t then you should consult the manufacturers and exchange it for a better product.
When there’s a problem with the system like it’s leaking, there is a problem with the pump, the filter being clogged or there is a pump issue then clogging is caused. You will know there is a clogging problem by simply feeling the liquid flow being decreased.
To solve this issue you need to make sure that your problem is caused by the bypass valve present inside the liquid. Not only will this decrease the water flow towards the softener but when you turn it on and watch liquid running fine, then it’s a problem with the softener itself.
A test can be done to let you know if it’s this problem or any other. You need to turn the faucet on, flush the toilet and run showers. Specific types of products are available which can be purchased to clean resin inside the tank. Put half a cup of this product and put it into the well brine.
If you have a lot of iron in your system then it might not be enough but you can always get products that can dissolve high amounts of iron inside it. These are some powdered form products that need to be dissolved into the liquid to make a rather simpler solution for dissolving iron into the brine tank.
When you are doing this once or twice a year, then there won’t be any issues and can help your softener work for years to come without any issues. But keep in mind, when your water is from well, then you need to apply this more than twice a year.
Filter Being Dirty:
Last but not least, it can be caused by the Dirty Filter. Well, it’s the most common amongst them all and it’s the easiest one too. When you get the best water softener under $500, always make sure to check the filters after some time.
Most of the time they need to be checked, cleaned, and even replaced in certain scenarios. It occurs after some time, but due to heavy usage and dirty liquid, it can occur within a few weeks of installation. If you regularly check the filters and change or clean them timely, they can protect your health and also protect your home appliances.
Finally, you need to check the problem and its starting point. You can always use the reduction method to get the cause of the issue. Simply turn the valve and if there is a sound of leakage or there is a noise which was appearing and is now gone, then you know exactly what is the source of the problem. Other than this, if there is no leakage or noise, then you can troubleshoot and repair the above-mentioned problems.